Sound Devices A10 Rack
Sound Devices A10 Rack
The A10-RACK is a 4 slot, 8 channel, 1RU wireless microphone receiver enclosure, compatible with most Unislot and SuperSlot™ receivers. The A10-RACK accepts up to 4 dual-channel slot-in receivers, providing a total of 8 separate audio feeds. The A10-RACK provides high-quality antenna distribution, power distribution, up to 8 channels of analogue and/or AES digital audio via XLR-M connectors and an 8 channel Dante audio interface.
Additional Info
Antenna distribution with 12V power for active antennas and pass-through for a second A10- RACK (for a total of 16 audio channels)
Powering distribution via 4-pin XLR-M socket, 10-18VDC
Analogue or AES outputs via eight XLR-M sockets on rear panel
Each receiver can be set to output analogue or AES individually (if supported by receiver)
Simultaneous analogue / AES and Dante outputs
Secondary Ethernet port for Dante redundancy or daisy-chaining second A10-RACK
USB-B port for updating RX firmware via Mic2Wav app
470-694MHz front-end RF filter bandwidth
1RU chassis size with adjustable rack ears to set required depth Compatible Receivers
Dante audio network integration for up to four Superslot compatible wireless mic receivers (eight audio channels), such as Audio Limited’s A10-RX, as well as some models by Wisycom and Lectrosonics.
The A10-RACK fits slot-in receivers with maximum dimensions of:
Slot height: 18mm (0.71 inches)
Slot width: 68.3mm (2.69 inches)
Width between SMAs: 84.4mm (3.32 inches)